SecureSmith System can use an original wired security zone and wireless security zone in a same time.

Wireless is providing an easy to install and convenience to use.

Use 16 wired zones + 6 wireless zones up to maximum 22 zones.

Away mode will protect the zones you had enabled, home mode can by pass some of the in door zones and keep protect the other security zone.

SecureSmith System will dial out to the owner or CMS if the system is getting an intrusion alert, other feature like power failure dial out or etc

User can by call to the SecureSmith System to monitor your house security status, control your home automation device or leave a message for your family member as well.

SecureSmith is provided a user-friendly interface software (SecureSmith Configuration Software) for user to change a setting of the system or monitor all the system information or CCTV.

User can use this SecureSmith Configuration Software and SecureSmith Remote Client Software to doing an Internet remote access.

SecureSmith System are allow user to adjust the wired zone sensitivity to avoid the false alarm event.

User can define every single zone properties (Like Enable, Home Mode by Pass, Invert Logic, Trigger Delay or etc) by your require.

User can define if the zone is trigger and turn on some automation device or switch to that specify CCTV channel.

Real human voice feedback is through the phone or speaker for acknowledgement.

User can assign maximum 5 character for each zone, so user can easy to know the zone description through the phone or speaker.

Built in G-lop automation transmission feature

Built in CCTV feature

Built in answering machine feature

Built in Lightning arrester

Built in backup battery

CMS compatible

Doorbell Intercom feature (optional)

iNix wireless receiver system (optional)