Single Door Controller
Category: Card Access System
Manufacturer: Smartkey
| Function | SK10 | SK100 | SK100-CN | SK100-Pro |
| Card Open Door | Present card to external or build-in wiegand reader | |||
| Card + PIN Open Door |
|
|||
| Security PIN Open Door | ||||
| Card ID Open Door | ||||
| Connect External Wiegand Reader | Support any 26/34 bit wiegand card reader and free wiegand card reader | |||
| Free Wiegand Setting | Yes. Able to configure battery low-voltage alarm when using long range reader | |||
| Connect External Keypad Reader |
|
|||
| Connet External SK Fingerprint Reader | Yes, via wiegand port | |||
| Connection to PC | via RS232, RS485 or TCP/IP (require TCP/IP converter) | |||
| Exit by Push Button | Yes | |||
| Door Force Open Alarm | Yes | |||
|
Door Held Open Alarm |
1-255 seconds. Factory default is 5 seconds. Alarm output can be disable | |||
| Add/Delete Card in Standalone Mode | Yes | |||
| Multi-card Verification | Yes, up to 8 cards | |||
| Keypad Open Door | Through controller keypad. Factory default is "No" | |||
| Wrong PIN Control | During Card + PIN operation, if PIN enter 3 times incorrectly will disable the controller for 30 seconds | |||
| Same Card Delay | 0-255 seconds. Factory default is 0 second | |||
| Time Zone Control | 32 set of timezone | |||
| Holiday Control | Yes | |||
| Lost / inhabit Card | Yes | |||
| Card Start and Expiry Date Validation | Yes | |||
| Door Auto Unlock by Timezone | Yes | |||
| Connect External Printer | Yes | |||
| Connect External LED | No | 3rd Serial Port | No | No |
| Dynamic Storage Adjustment | No | Yes | No | No |
| Anti-passback | Yes (Local or Global). Able to reset manually or by time | |||
| Timing Event (Alarm Clock) | Yes | |||
| Alarm arming / disarm | Yes | |||
| Anti Tailgating | Yes | |||
| Time Error Correction | Yes | |||
| Card Number Output Byte | 1-4 bytes. Default is 4 bytes | |||
| Card Number Display Format | HEX, DEC, ABA, User code. Default is DEC | |||
| Communication Monitoring | Yes | |||
| Internal Buzzer Alarm | Able to setup trigger alarm buzzer when door force open or door held open alarm. Factory default is "No" | |||
| PIN Control | Able to setup Exit without PIN control. Factory default is Yes | |||
| Timezone Control | Able to set to Exit without Timezone control. Factory default is Yes | |||
| Tamper Alarm | Build-in tamper switch. If device is opened, controller will send an alarm record to back end PC | |||
| Door Left Open Restore transaction | Yes | |||
| 485 Comm Terminating Resistor | via Jumper setting | |||
